FISHPLATES

A total selection of fishplates available to match every
rail application. Machined surface and perfect bore hole
alignment speeds installation.
  • Regular
  • Triple thick (drilled, tapped, and counterbored plates)
  • FSMs "Full Section Modulus" T-Section, (seismic)
  RAIL CLIPS

Hot forged clips are available for eight-pound through
thirty-pound rails. Sliding steel clips are available for up to
18.5-pound rails.


Sales - AFD Industries
 

Back To Top
RAIL BRACKETS

Formed 1/4” Plate, 12” long in a prime finish including nuts and bolts in three back of rail to wall dimensions.

Short 2 3/8" to 4 3/4"
Intermediate 4" to 7 1/2"
Long 4" to 10 1/4"
 

COUNTERWEIGHTS

  • Produced to exact specifications by CAD/CAM-driven
    technology with tolerances to +1/16"
Counterweight Catalog Sheet
  WEDGE SOCKETS

AFD wedge sockets are tested with IWRC EHS traction steel elevator rope and exceed the requirements of the B44 Canadian Safety Code and ANSI A17.1 Rule 2.20.9 for tensile strength and elongation.

Assembly includes socket, wedge, nuts, bolts, washers, cotter pins and retaining clips.

Springs and isolation bushings are also available upon request.

  Back To Top
TENSIOMETER

The AFD TD-100 wire rope tensioning device is essential to achieving quick and accurate adjustments of wire rope installation and maintenance. Kit includes detailed instruction guide.

All ropes should be checked for tension immediately upon installation and several weeks later for the greatest financial & operative benefits. Equal rope tension adds to the life of the wire rope and the sheaves. The TD100 is simple to use and accurate. The TD100 saves on call backs and cable shortening.


Tensiometer Catalog Sheet
  MUFFLERS

Available with NPT or Victaulic ends.